Solchem formulates and blends production, drilling, water-treatment, pipeline- integrity and industrial cleaning chemicals for the oil and gas, marine, power and manufacturing sectors. Every batch is laboratory-tested, documented and traceable from raw material to dispatch.
Whether your business is in the upstream or downstream sector of Nigeria’s oil and gas industry, or in the non-oil sector — cement, glass, iron and steel, power, household and agro business — protecting your cooling water, influent/effluent, steam generation, process and drilling facilities involves the integration of products, field services, and laboratory support and monitoring equipment into a complete programme.
Moulding these facets into a total programme is what we do best. Solchem Ottman Nigeria Limited brings to bear a total involvement approach to help find solutions for difficult water and process problems.
Ours is a total treatment programme that integrates chemical treatment backed with experienced services.
Ours is a total treatment programme that integrates chemical treatment backed with experienced services.
Most chemical companies stop at supply. At Solchem Ottman we add the commitment of the entire management team to ensure you get the best results possible for your treatment expenditure.
A broad range of imported and locally manufactured industrial chemicals, held in stock and supplied in standard commercial packaging.
On-site application support so treatment chemistry is dosed, monitored and adjusted under real operating conditions.
Analytical support for difficult water and process problems, so treatment decisions are based on tested results.
Monitoring integrated with the treatment programme to track performance across the systems being protected.
By taking the best approach, we provide the best protection for your cooling, boiler, influent/effluent, process and produced water.
Scale, corrosion and microbiological control for cooling circuits and heat-transfer equipment.
Treatment of incoming water and discharged effluent to keep plant water within operating and environmental limits.
Boiler and steam-side treatment protecting tubes, drums and condensate return lines.
Process water and produced-water chemistry to protect equipment and hold product quality.
Drilling fluid additives — viscosifiers, fluid-loss control, weighting agents and brines — supplied to specification.
By taking the best approach, we provide the best protection for your cooling, boiler, influent/effluent, process and produced water.
Polyanionic cellulose, regular grade, for fluid-loss control and rheology in water-based drilling fluids. Supplied in 25kg bags.
Polyanionic cellulose, low-viscosity grade, for filtration control where minimal viscosity increase is required.
Carboxymethyl cellulose, high-viscosity grade, for viscosity building and fluid-loss control. Supplied in 25kg bags.
Biopolymer viscosifier delivering shear-thinning rheology and hole-cleaning performance in drilling and completion fluids.
Pre-gelatinised starch for filtration control in freshwater, seawater and brine-based drilling and completion fluids.
Industrial-grade salt for brine preparation, density control and general process use.
Technical grade potassium chloride, Dead Sea Works Ltd, Israel — shale inhibition and clear brine preparation. Supplied in 25kg bags.
Calcium chloride for brine density, completion fluids and process applications, supplied in bagged quantities.
Glutaraldehyde-based microbiological control for water systems, drilling fluids and produced water. Supplied in labelled IBC containers.
Film-forming inhibitors protecting cooling, process, produced-water and pipeline systems from internal corrosion.
Sulphonated asphalt additive for shale stabilisation, wellbore strengthening and filter- cake quality in drilling fluids.
Emulsifier package for invert emulsion and oil- based fluid systems, supplied in labelled drums and containers.
Manufacturing, importation and supply run to a defined sequence, so material reaching your site is the material specified.
Materials are procured against specification and verified on receipt — identity, condition and documentation are checked before acceptance into storage.
Every product is made to a controlled formulation sheet: component list, addition sequence, quantities and processing conditions are defined before blending begins.
Batch blending in dedicated vessels with controlled addition, mixing and, where required, heating or reaction time per the formulation sheet.
Operators record batch parameters and take in-process samples so deviations are caught before the batch is completed.
Finished batches are tested against the product specification. A batch is only released when results conform — nonconforming material is held and dispositioned.
Released product is filled into drums, IBCs or bulk containers with batch number, product identity, hazard labelling and net content marked on every unit.
Each consignment is issued with a certificate of analysis and a current safety data sheet, and the batch record is retained for traceability.
Finished goods are stored segregated by compatibility and delivered with handling guidance, so product reaches site in specification.
Quality control is a condition of release, not an afterthought. These are the controls that govern every consignment Solchem Ottman supplies.
Every programme begins with safety expectations for the classroom, workshop and any site-based activity.
Programme content, facilitator assignment and candidate records are reviewed before each cohort is published.
Practical sessions are supervised, procedure-driven and assessed rather than demonstrative only.
Readiness is assessed internally before a candidate is presented to an awarding body.
Attendance, punctuality, PPE compliance and honest declaration of information are conditions of participation.
Attendance, punctuality, PPE compliance and honest declaration of information are conditions of participation.
As an HSE training facilitator, Solchem applies the same hazard-control discipline on its own production floor that it teaches to candidates.
Every product and process step is hazard-assessed before production, with controls defined in the work procedure.
Task-appropriate PPE, local ventilation and handling equipment are mandatory in blending and filling areas.
Raw materials and finished goods are stored by compatibility class, with bunding and spill containment at storage and transfer points.
A current SDS accompanies every consignment and is available at every point where product is stored or handled.
Process washings, off-spec material and packaging residues are managed as controlled waste streams, consistent with Solchem’s environmental management practice.
Spill response equipment, eyewash facilities and trained response procedures are in place across production and storage areas.
Chemical supply is not separate from Solchem’s training work — it feeds the technical content of several programmes.
The hazard-control discipline taught in Solchem’s HSE programmes is the same discipline applied on the chemical production floor.
Corrosion inhibitor and damage-mechanism knowledge connects directly to the refining and petrochemical damage mechanisms covered in API 571 preparation.
Effluent, waste and environmental controls in chemical production feed the environmental content within Solchem’s HSE and EIA-oriented programmes.
Tell us the product line, specification and quantity you need. Technical datasheets, certificates of analysis and safety data sheets are available for every product.
Best for applications, document queries and partnership enquiries. Written responses are issued to every enquiry.
Best for quick questions about programme dates, eligibility and application status during working hours.
Organisations can enquire about chemical supply and toll blending, or explore the training programmes built on this production experience.
